Name
Rated Speed
Rated Current
Nominal Torque
Nominal Power
Length
Case-Ø
VGM 3125
3000.0 min-1
2.0 ADC
0.096 Nm
30.0 W
97.0 mm
55.0 mm
VGM 3125 - Motor Design
The standard DC Motors series VGM 31 are equipped with plain shaft and round output flange in design B14. Due to lifetime optimisation of the carbon brushes it was possible to eliminate the brush holder opening. The cable comes to the outside via cable gland. Flange mounting with 4 threads, see drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 2.0 A |
| Nominal Power | 30.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 55.0 mm |
| Length | 97.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.0177 · 10-3 kgm2 |
| Nominal Torque | 0.096 Nm |
| Max. Continuous Torque | 0.105 Nm |
| Starting Torque | 0.4 Nm |
| Speed Change Per Torque | 83.0 N-1cm-1min-1 |
| Mechanical Time Constant | 15.4 ms |
| Friction Torque | 0.02 Nm |
| Rotor Weight | 0.19 kg |
| FR (Permissible radial shaft load) | 100.0 |
| FA (Permissible axial shaft load) | 40.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 2.6 Ω |
| Anchor Inductance | 3.0 mH |
| Terminal Resistance | 3.13 Ω |
| Voltage Constant | 6.27 V/1000 min -1 |
| Torque Constant | 0.06 Nm/A |
| Starting Current | 7.7 A |
| Max. Peak Current | 16.0 A |
| Electrical Time Constant | 0.96 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 32 min |
| Temperature Rise Without Cooling | 4.7 K/W |
VGM 3150
3000.0 min-1
3.1 ADC
0.175 Nm
55.0 W
122.0 mm
55.0 mm
VGM 3150 - Motor Design
The standard DC Motors series VGM 31 are equipped with plain shaft and round output flange in design B14. Due to lifetime optimisation of the carbon brushes it was possible to eliminate the brush holder opening. The cable comes to the outside via cable gland. Flange mounting with 4 threads, see drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 3.1 A |
| Nominal Power | 55.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 55.0 mm |
| Length | 122.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.0296 · 10-3 kgm2 |
| Nominal Torque | 0.175 Nm |
| Max. Continuous Torque | 0.2 Nm |
| Starting Torque | 0.96 Nm |
| Speed Change Per Torque | 33.0 N-1cm-1min-1 |
| Mechanical Time Constant | 10.1 ms |
| Friction Torque | 0.025 Nm |
| Rotor Weight | 0.3 kg |
| FR (Permissible radial shaft load) | 100.0 |
| FA (Permissible axial shaft load) | 40.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 1.05 Ω |
| Anchor Inductance | 1.4 mH |
| Terminal Resistance | 1.4 Ω |
| Voltage Constant | 6.69 V/1000 min -1 |
| Torque Constant | 0.064 Nm/A |
| Starting Current | 17.1 A |
| Max. Peak Current | 31.0 A |
| Electrical Time Constant | 1.0 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 32 min |
| Temperature Rise Without Cooling | 3.9 K/W |
VGM 3175
3000.0 min-1
4.1 ADC
0.239 Nm
75.0 W
148.0 mm
55.0 mm
VGM 3175 - Motor Design
The standard DC Motors series VGM 31 are equipped with plain shaft and round output flange in design B14. Due to lifetime optimisation of the carbon brushes it was possible to eliminate the brush holder opening. The cable comes to the outside via cable gland. Flange mounting with 4 threads, see drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 4.1 A |
| Nominal Power | 75.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 55.0 mm |
| Length | 148.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.0421 · 10-3 kgm2 |
| Nominal Torque | 0.239 Nm |
| Max. Continuous Torque | 0.27 Nm |
| Starting Torque | 1.5 Nm |
| Speed Change Per Torque | 19.0 N-1cm-1min-1 |
| Mechanical Time Constant | 8.4 ms |
| Friction Torque | 0.035 Nm |
| Rotor Weight | 0.42 kg |
| FR (Permissible radial shaft load) | 100.0 |
| FA (Permissible axial shaft load) | 40.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 0.69 Ω |
| Anchor Inductance | 0.94 mH |
| Terminal Resistance | 0.9 Ω |
| Voltage Constant | 7.06 V/1000 min -1 |
| Torque Constant | 0.067 Nm/A |
| Starting Current | 26.0 A |
| Max. Peak Current | 43.0 A |
| Electrical Time Constant | 1.04 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 32 min |
| Temperature Rise Without Cooling | 3.3 K/W |
VGM 5440
3000.0 min-1
8.3 ADC
0.477 Nm
150.0 W
162.0 mm
83.0 mm
VGM 5440 - Motor Design
The standard DC Motors series VGM 54 are equipped with plain shaft and round output flange in design B14. Due to lifetime optimisation of the carbon brushes it was possible to eliminate the brush holder opening. The cable comes to the outside via cable gland. Flange mounting with 4 threads, see drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 8.3 A |
| Nominal Power | 150.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 83.0 mm |
| Length | 162.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.2 · 10-3 kgm2 |
| Nominal Torque | 0.477 Nm |
| Max. Continuous Torque | 0.59 Nm |
| Starting Torque | 3.8 Nm |
| Speed Change Per Torque | 6.2 N-1cm-1min-1 |
| Mechanical Time Constant | 12.9 ms |
| Friction Torque | 0.08 Nm |
| Rotor Weight | 0.85 kg |
| FR (Permissible radial shaft load) | 140.0 |
| FA (Permissible axial shaft load) | 56.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 0.24 Ω |
| Anchor Inductance | 0.7 mH |
| Terminal Resistance | 0.29 Ω |
| Voltage Constant | 7.02 V/1000 min -1 |
| Torque Constant | 0.067 Nm/A |
| Starting Current | 74.0 A |
| Max. Peak Current | 65.0 A |
| Electrical Time Constant | 2.4 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 40 min |
| Temperature Rise Without Cooling | 2.2 K/W |
VGM 5480
3000.0 min-1
12.9 ADC
0.796 Nm
250.0 W
202.0 mm
83.0 mm
VGM 5480 - Motor Design
The standard DC Motors series VGM 54 are equipped with plain shaft and round output flange in design B14. Due to lifetime optimisation of the carbon brushes it was possible to eliminate the brush holder opening. The cable comes to the outside via cable gland. Flange mounting with 4 threads, see drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 12.9 A |
| Nominal Power | 250.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 83.0 mm |
| Length | 202.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.37 · 10-3 kgm2 |
| Nominal Torque | 0.796 Nm |
| Max. Continuous Torque | 1.1 Nm |
| Starting Torque | 7.1 Nm |
| Speed Change Per Torque | 3.0 N-1cm-1min-1 |
| Mechanical Time Constant | 11.6 ms |
| Friction Torque | 0.1 Nm |
| Rotor Weight | 1.4 kg |
| FR (Permissible radial shaft load) | 140.0 |
| FA (Permissible axial shaft load) | 56.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 0.106 Ω |
| Anchor Inductance | 0.33 mH |
| Terminal Resistance | 0.152 Ω |
| Voltage Constant | 7.3 V/1000 min -1 |
| Torque Constant | 0.0697 Nm/A |
| Starting Current | 126.0 A |
| Max. Peak Current | 115.0 A |
| Electrical Time Constant | 2.2 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 40 min |
| Temperature Rise Without Cooling | 1.8 K/W |
VGM 8035/4
3000.0 min-1
15.2 ADC
0.9 Nm
280.0 W
147.0 mm
110.0 mm
VGM 8035/4 - Motor Design
The DC motors of the VGM 80 series are manufactured as standard with shaft with keyway and round output flange in B14 design. The service life of the carbon brushes has been optimized, therefore the brush openings have been omitted. The connecting cable is axially outward via a screw connection. Flange mounting with 4 threads, see dimensional drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 15.2 A |
| Nominal Power | 280.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 110.0 mm |
| Length | 147.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 0.92 · 10-3 kgm2 |
| Nominal Torque | 0.9 Nm |
| Max. Continuous Torque | 1.05 Nm |
| Starting Torque | 6.5 Nm |
| Speed Change Per Torque | 2.2 N-1cm-1min-1 |
| Mechanical Time Constant | 21.3 ms |
| Friction Torque | 0.18 Nm |
| Rotor Weight | 1.6 kg |
| FR (Permissible radial shaft load) | 200.0 |
| FA (Permissible axial shaft load) | 80.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 0.07 Ω |
| Anchor Inductance | 0.27 mH |
| Terminal Resistance | 0.12 Ω |
| Voltage Constant | 7.57 V/1000 min -1 |
| Torque Constant | 0.072 Nm/A |
| Starting Current | 160.0 A |
| Max. Peak Current | 103.0 A |
| Electrical Time Constant | 2.3 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 40 min |
| Temperature Rise Without Cooling | 1.0 K/W |
VGM 8070/4
3000.0 min-1
27.0 ADC
1.6 Nm
500.0 W
202.0 mm
110.0 mm
VGM 8070/4 - Motor Design
The DC motors of the VGM 80 series are manufactured as standard with shaft with keyway and round output flange in B14 design. The service life of the carbon brushes has been optimized, therefore the brush openings have been omitted. The connecting cable is axially outward via a screw connection. Flange mounting with 4 threads, see dimensional drawing.
Information
Tolerances according to VDE 0530. ± 10% for tolerances not specified according to VDE 0530. All values are only valid for use in the temperature range from 0 to 40
°C and must not be exceeded, even for a short time, as otherwise there is a risk of magnetic weakening. All data with reference to our disclaimer.
| General Data | |
|---|---|
| Rated Speed | 3000.0 min-1 |
| Nominal Voltage | 24 V |
| Rated Current | 27.0 A |
| Nominal Power | 500.0 W |
| Operating Mode | S1 |
| Degree Of Protection | IP 54 (IP 65 auf Anfrage) |
| Direction Of Rotation | reversibel |
| Connection Type | Mantelleitung |
| Type | IM B14 |
| Diameter | 110.0 mm |
| Length | 202.0 mm |
| Mechanical Data | |
|---|---|
| Mass Moment Of Inertia | 1.55 · 10-3 kgm2 |
| Nominal Torque | 1.6 Nm |
| Max. Continuous Torque | 1.9 Nm |
| Starting Torque | 9.0 Nm |
| Speed Change Per Torque | 2.1 N-1cm-1min-1 |
| Mechanical Time Constant | 34.0 ms |
| Friction Torque | 0.18 Nm |
| Rotor Weight | 2.5 kg |
| FR (Permissible radial shaft load) | 200.0 |
| FA (Permissible axial shaft load) | 80.0 |
| Electrical Data | |
|---|---|
| Armature Resistance | 0.03 Ω |
| Anchor Inductance | 0.1 mH |
| Terminal Resistance | 0.098 Ω |
| Voltage Constant | 7.0 V/1000 min -1 |
| Torque Constant | 0.067 Nm/A |
| Starting Current | 195.0 A |
| Max. Peak Current | 150.0 A |
| Electrical Time Constant | 1.02 ms |
| Thermal Data | |
|---|---|
| Max. Ambient Temperature | 40.0 °C |
| Insulation Class | F |
| Thermal Time Constant | 40 min |
| Temperature Rise Without Cooling | 0.71 K/W |
Loading...
This website uses cookies to improve the user experience. By clicking one of the buttons below, you agree to the use of cookies. By clicking on "All Cookies", you further agree that this website may also store non-essential cookies on your device and share information in accordance with our Cookie Policy. For detailed information, please see our Privacy Policy.